HEPA Filter in Talegaon
HEPA Filter Manufacturers, Suppliers and Dealers in Talegaon
National Air Filters is a leading HEPA filter manufacturers in Talegaon. We are trusted suppliers and dealers in Talegaon, Pune. We manufactured and supplied HEPA and industrial air filters from Pune since 2017. We make standard and custom-size HEPA filters for manufacturing plants, pharmaceutical and food units, laboratories, cleanrooms, hospitals and commercial buildings across Pune, including Talegaon MIDC, Talegaon Dabhade and the nearby Chakan, Induri, Vadgaon Maval and Dehu Road belts. Our work to date covers 800+ projects for 760+ customers.
If you are looking for HEPA filter manufacturers, suppliers or dealers in Talegaon, send us your filter size, grade and airflow, or the model number of your existing filter. We will help you match it to your air handling unit (AHU), terminal box or filtration unit.
What Is a HEPA Filter and How Does It Work?
A HEPA (High-Efficiency Particulate Air) filter traps fine airborne particles such as dust, pollen, mould spores and particles that carry microorganisms. Under the US standard, a True HEPA filter captures at least 99.97% of 0.3-micron particles. Under the European standard EN 1822 / ISO 29463, filters are graded at their most penetrating particle size (MPPS).
The filter media works through three mechanisms:
- Interception: particles following the airflow touch a fibre and stick to it.
- Impaction: larger particles cannot follow the air around a fibre and hit it directly.
- Diffusion: the smallest particles move erratically and collide with fibres.
A HEPA filter performs well only when it is correctly selected, sealed and maintained. A pre-filter upstream protects the HEPA filter and extends its service life.
Types of HEPA Filters We Supply in Talegaon
| Type | Efficiency / Design | Typical Use |
|---|---|---|
| H13 HEPA filter | Minimum 99.95% at MPPS | Hospitals, laboratories, pharmaceutical AHUs, commercial HVAC |
| H14 HEPA filter | Minimum 99.995% at MPPS | Operation theatres, pharmaceutical production, critical cleanrooms |
| Mini-pleat HEPA filter | Closely spaced pleats, large media area in a compact frame | Cleanroom terminal units, FFUs, AHUs |
| Deep-pleat HEPA filter | Deeper pleats with separators and rigid frame | Industrial ventilation, central AHUs, higher airflow |
| Box-type HEPA filter | Media enclosed in a rigid frame or housing | Ceiling systems, AHUs, industrial filtration |
| Gel-seal HEPA filter | Gel channel seal to limit bypass at the mounting frame | Pharmaceutical and controlled-environment cleanrooms |
| V-bank HEPA filter | Multiple packs in a V arrangement | Commercial and industrial AHUs needing higher airflow |
All filters are available in GI or aluminium frames, in standard and custom sizes. For ceiling-mounted installations, we also supply HEPA terminal boxes. For dusty plant air, we also supply pre-filters and pocket filters to sit upstream of the HEPA stage.
Technical Specifications
| Parameter | H13 | H14 | Mini-Pleat | Deep-Pleat | Gel-Seal | V-Bank |
|---|---|---|---|---|---|---|
| Efficiency at MPPS | Min. 99.95% | Min. 99.995% | H13 or H14 | H13 or H14 | H13 or H14 | As specified |
| Typical sizes (mm) | 305×305×150; 610×610×150 | 305×305×150; 610×610×150 | 305×305×70; 610×610×70 | 610×610×292 | 610×610×90; 610×610×150 | 592×592×292; 610×610×292 |
| Indicative airflow (m³/h) | 150–1,000 | 150–900 | 150–1,200 | 500–2,000 | 500–1,200 | 1,000–3,500 |
| Initial pressure drop (Pa) | 100–250 | 120–300 | 80–250 | 150–300 | 100–250 | 100–300 |
| Test standard | EN 1822 / ISO 29463 | EN 1822 / ISO 29463 | As certified | As certified | As certified | As certified |
Where HEPA Filters Are Used Around Talegaon
Talegaon MIDC and Talegaon Dabhade combine automotive, engineering, plastics, food, FMCG and pharmaceutical units with a growing town of hospitals, clinics, schools and colleges. HEPA filtration is typically specified for:
- Pharmaceutical and medical device units: cleanrooms, laminar air flow units, pass boxes, sampling booths and dispensing areas.
- Food, beverage and FMCG units: sensitive filling, packing and preparation zones, where the design calls for HEPA.
- Plastics, packaging and moulding units: clean zones for products that need low contamination, such as medical, pharma and food packaging.
- Electronics and precision assembly: low-particle work areas, often using FFUs or ceiling HEPA modules.
- Quality control and testing laboratories: controlled air and particle control for sensitive measurement and testing.
- Hospitals, clinics and diagnostic labs: operation theatres, ICUs, procedure rooms and sample-handling areas.
- Educational institutions and commercial buildings: laboratories and final-stage filtration in central HVAC where better air quality is needed.
The right grade depends on your applicable standard, such as ISO 14644 cleanroom class, GMP requirements for pharma, or hospital ventilation guidelines. Your designer or validation team should confirm the grade.
Documents to Keep for Audits
Units in Talegaon MIDC that work under GMP, food-safety or customer audits are often asked to show records for their HEPA filters. Keep these on file for each filter:
- Filter specification: grade (H13 or H14), size, construction and rated airflow.
- Test report or certificate from the manufacturer, showing the efficiency grade claimed and the standard it was tested to.
- Installation record: date, location or terminal box number, and who installed it.
- Integrity (leak) test and particle count results after installation, where your area requires them.
- Pressure drop log: readings over time and the replacement limit you follow.
- Replacement history: dates, reasons and the batch or serial number of each filter.
How to Choose the Right HEPA Filter
- Filter grade: choose H13 or H14 to match your required air cleanliness.
- Airflow: match the filter's rated airflow to your AHU or terminal box.
- Pressure drop: check initial resistance so your fan can handle it as the filter loads.
- Size and construction: pick mini-pleat, deep-pleat, box-type, gel-seal or V-bank to suit your housing and space.
- Sealing: confirm that the gasket or gel seal fits your frame to limit bypass.
- Maintenance: plan for pre-filters, pressure monitoring and easy replacement.
Why Buy HEPA Filters from National Air Filters?
- Manufacturer and supplier: we make filters at our Pune facility and also supply pre-filters, pocket filters, bag filters and terminal boxes, so you can source the full filtration line in one place.
- Custom sizes: we make filters to match your existing equipment and housings, including older units that are hard to source.
- Technical guidance: our team helps you choose grade, size and sealing, and supports installation queries.
- Delivery to Talegaon: we deliver from Pune to Talegaon MIDC, Talegaon Dabhade and nearby areas such as Chakan, Induri, Vadgaon Maval, Dehu Road, Urse and Somatane.
Contact National Air Filters
National Air Filters
1st Floor, Survey No. 132/3/1, Saswad Road, Urali Dewachi, Haveli, Pune, Maharashtra 412308
Phone: +91 7887549853 | +91 8975495013
Email: info@nationalairfilterspune.com
FAQs: HEPA Filters in Talegaon
Ans: They remove fine airborne particles in hospitals, laboratories, cleanrooms, pharmaceutical units, food and packaging plants, industrial plants and commercial HVAC systems.
Ans: Ask for the filter's grade and specification, the test report or certificate for that grade, and the dimensions and rated airflow. After installation, keep your own integrity test, particle count and pressure drop records.
Ans: We supply H13 and H14 filters in mini-pleat, deep-pleat, box-type, gel-seal and V-bank designs, plus HEPA terminal boxes, pre-filters and pocket filters, delivered from our Pune facility.
Ans: Yes. We can make filters to your size, frame material (GI or aluminium) and grade. Share your drawing or existing filter details for a quote.
Ans: No. Washing or cleaning can damage the media and the seal. Clean or replace the pre-filters more often to protect the HEPA filter.
Ans: There is no fixed lifespan. It depends on dust load, airflow, operating hours and pre-filtration. Facilities usually replace a filter when its pressure drop reaches the limit set by the manufacturer, or if an integrity test fails.
Ans: Replace it if the pressure drop reaches the manufacturer's final limit, airflow falls, the filter is visibly damaged, or a leak test fails.
Ans: Price depends on grade, size, construction, frame material and quantity. Send us your requirements for a quotation.
